Automatic Thread Trimmer
The machine is equipped with an automatic thread trimming device which simultaneously cuts the needle and bobbin threads at the sewing end by lightly pressing the push-button. It uses the thread trimming mechanism which is similar to the industrial sewing machine type, cutting thin through thick threads without fail.

Easy bobbin replacement
The take-out aperture in the bobbin case is widened to facilitate bobbin removal. The auxiliary table is also provided with a removable plate which allows you to easily remove/load bobbins even when the auxiliary table is installed on the machine.

Heavy-weight materials are sewn with ease
The speed control mechanism, by meas of microcomputer and high power, makes it possible to sew material at low speeds, promising consistent sewing ability even when using heavy-wieght materials. If using a knee lifter lever which allows you to raise/lower the presser foot without using your hands, the presser foot can be raised as high as 12mm. So, you can set heavy-weight material on the machine with ease.

Predetermined stop position of the needle
(immediate stop)
When you stop the sewing machine, it will come to an accurate stop with its needle down. In addition, a newly incorporated needle up/down swithch allows the operator to move the needle up/down as desired.