1525 10th Avenue South #2 Great Falls, MT 59405
24/7 Online
24/7 Online
Established 1998, Veteran Owned and Operated by 8 veterans
Award Winning
Authorized National Handi Quilter Dealer Since 2006
Authorized Janome and Brother Dealer Since 2004
Award Winning
Authorized National Handi Quilter Dealer Since 2006
Authorized Janome and Brother Dealer Since 2004
Quilting Foot C - Closed Toe foot. XE0765101 ^
Small Needle Hole in this Low Shank Screw On Foot Prevents Skipped Stitches and Shredded Thread Caused by Flagging of Fabric Up and Down on the Needle versus a larger hole in the foot.
For free-motion quilting, use free-motion quilting foot “C” or free-motion open toe quilting foot “O”depending on the stitch that is selected, and set the machine to free-motion sewing mode. In this mode, the presser foot is raised to the necessary height for free motion sewing. We recommend attaching the foot controller and sewing at a consistent speed. You can adjust the sewing speed with the speed limit control slider on the machine.
For free-motion quilting, use free-motion quilting foot “C” or free-motion open toe quilting foot “O”depending on the stitch that is selected, and set the machine to free-motion sewing mode. In this mode, the presser foot is raised to the necessary height for free motion sewing. We recommend attaching the foot controller and sewing at a consistent speed. You can adjust the sewing speed with the speed limit control slider on the machine.
Specifications
Using Free-motion Quilting Foot “C”
The free-motion quilting foot “C” is used for free motion sewing using the straight stitch needle plate.
Make sure that the quilting foot is attached properly and not slanted. Hold the quilting foot in place with your right hand, and tighten the presser foot holder
screw using the screwdriver with your left hand.
CAUTION
The free-motion quilting foot “C” is used for free motion sewing using the straight stitch needle plate.
Make sure that the quilting foot is attached properly and not slanted. Hold the quilting foot in place with your right hand, and tighten the presser foot holder
screw using the screwdriver with your left hand.
CAUTION
- Be sure to tighten the screw securely with the screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break.
- Lower the feed dog position switch to lower the feed dogs.