Each anchor has 2 screw holes on the back and 1 washer. Tip: Make sure you stabilize the insertion area on your fabric so that they are nice and strong. If using fabric you can interface with Decor Bond (or similar) or use thin fusible fleece, for thick leathers you will just need thin interfacing. If you have stabilized your fabric with foam or something thick, you may need to trim that away for the screws to reach the threading. Use the provided washer to mark your screw holes on exterior bag, straps and interfacing. Use a 5mm leather punch to make holes. Glue is recommended. Stitching straps in place for added security before attaching is optional.
- Inside measurement of width strap anchor opening: 1" (25 mm)
- Height: 1" (25 mm)
- Thickness of strap: 3-4 mm (1/8")