1525 10th Avenue South #2 Great Falls, MT 59405
24/7 Online
24/7 Online
Established 1998, Veteran Owned and Operated by 8 veteransAward Winning
Authorized National Handi Quilter Dealer Since 2006
Authorized Janome and Brother Dealer Since 2004
FOLLOW US ON... 
2 Inch Double Folded Binding Tool For 1/ 2 Inch Strips 2INBIND-MARBLE Purple Hobbies ^
|
|
|
|
Low in-store inventory, may be subject to change.
Many quilt makers are now making masks with fabric ties. create 1/2" double folded strips tool to do it all in one step! You can use the tool to fold in both sides like many other binding tools:
Or, flip it on its side and you have instant double folded fabric. Trust me, when you're making miles of fabric ties, this is a tremendous time saver!
If you prefer to skip the ironing all together and go straight to your sewing machine!
Load the fabric into the tool, then place the end under your presser foot and lower the presser foot and the needle (use the needle down function to hold the strip in place).
Pull the tool back a few inches and begin to sew 1/16-1/8" from the folded edges. Stitch until the tool is close to the presser foot, then stop, pull the tool back a few inches and stitch. Repeat until you reach the end of the strip.
Or, flip it on its side and you have instant double folded fabric. Trust me, when you're making miles of fabric ties, this is a tremendous time saver!
If you prefer to skip the ironing all together and go straight to your sewing machine!
Load the fabric into the tool, then place the end under your presser foot and lower the presser foot and the needle (use the needle down function to hold the strip in place).
Pull the tool back a few inches and begin to sew 1/16-1/8" from the folded edges. Stitch until the tool is close to the presser foot, then stop, pull the tool back a few inches and stitch. Repeat until you reach the end of the strip.
It helps to hold the fabric taught as it goes into the tool so it achieves the best "fold". If necessary, you can adjust the folds before you begin stitching to get a perfect 1/2" strip.
Note: if you have a jelly roll rug tool you can use that for your 2 1/2" strips--I use 2" strips because they result in 1/2" ties which I prefer. The jelly roll rug tool is intended for thicker fabric so it takes a little more patience to make the double fold binding but it's still easier than ironing twice!It helps to hold the fabric taught as it goes into the tool so it achieves the best "fold". If necessary, you can adjust the folds before you begin stitching to get a perfect 1/2" strip.
Designed and 3D printed in California using PLA (a commercially compostable plastic made from renewable resources like corn starch and tapioca starch).
Designed and 3D printed in California using PLA (a commercially compostable plastic made from renewable resources like corn starch and tapioca starch).
CONTACT US
jw@bigskyquilts.com
406 727 17571525 10th Ave S #2
Great Falls, MT 59405
OPEN
Thursday, Friday, Saturday 10-5:30
CLOSED
Sunday, Monday, Tuesday, Wednesday
FOLLOW US
